R0106-HP MSR Router Series IP Multicast Command Reference(V7)

290
Use undo register-suppression-timeout to restore the default.
Syntax
register-suppression-timeout interval
undo register-suppression-timeout
Default
The register suppression time is 60 seconds.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
interval: Specifies the register suppression time in the range of 1 to 65536 seconds.
Examples
# Configure the register suppression time to 70 seconds on the public network.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] register-suppression-timeout 70
register-whole-checksum (IPv6 PIM view)
Use register-whole-checksum to configure the device to calculate the checksum based on an entire
register message.
Use undo register-whole-checksum to restore the default.
Syntax
register-whole-checksum
undo register-whole-checksum
Default
The device calculates the checksum based on the header of a register message.
Views
IPv6 PIM view
Predefined user roles
network-admin
Examples
# On the public network, configure the device to calculate the checksum based on an entire register
message.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] register-whole-checksum