R0106-HP MSR Router Series IP Multicast Command Reference(V7)

291
snmp-agent trap enable pim6
Use snmp-agent trap enable pim6 to enable SNMP notifications for IPv6 PIM.
Use undo snmp-agent trap enable pim6 to disable SNMP notifications for IPv6 PIM.
Syntax
snmp-agent trap enable pim6 [ candidate-bsr-win-election | elected-bsr-lost-election | neighbor-loss ]
*
undo snmp-agent trap enable pim6 [ candidate-bsr-win-election | elected-bsr-lost-election |
neighbor-loss ] *
Default
SNMP notifications for IPv6 PIM are enabled.
Views
System view
Predefined user roles
network-admin
Parameters
candidate-bsr-win-election: Specifies SNMP notifications about winning the BSR election.
elected-bsr-lost-election: Specifies SNMP notifications about losing the BSR election.
neighbor-loss: Specifies SNMP notifications about losing neighbors.
Usage guidelines
If you do not specify any optional keyword, this command enables or disables IPv6 PIM to generate
SNMP notifications.
With the SNMP notification feature enabled, IPv6 PIM generates notifications when important IPv6 PIM
events occur. The notifications are sent to the SNMP module. The output rules for IPv6 PIM notifications
depend on the SNMP notification configuration.
For more information about SNMP notifications, see Network Management and Monitoring
Configuration Guide.
Examples
# Disable SNMP notifications for IPv6 PIM.
<Sysname> system-view
[Sysname] undo snmp-agent trap enable pim6
source-lifetime (IPv6 PIM view)
Use source-lifetime to set the IPv6 multicast source lifetime.
Use undo source-lifetime to restore the default.
Syntax
source-lifetime time
undo source-lifetime