R0106-HP MSR Router Series IP Multicast Command Reference(V7)

22
[Sysname-GigabitEthernet2/1/1] igmp-snooping fast-leave vlan 2
Related commands
fast-leave (IGMP-snooping view)
igmp-snooping general-query source-ip
Use igmp-snooping general-query source-ip to configure the source IP address of IGMP general queries.
Use undo igmp-snooping general-query source-ip to restore the default.
Syntax
igmp-snooping general-query source-ip ip-address
undo igmp-snooping general-query source-ip
Default
The source IP address of IGMP general queries is the IP address of the current VLAN interface. If there is
no IP address for the current VLAN interface, the source IP address is 0.0.0.0.
Views
VLAN view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the source address of IGMP general queries. It can be any legal IP address.
Usage guidelines
You must enable IGMP snooping for a VLAN before you execute this command for the VLAN.
Examples
# In VLAN 2, enable IGMP snooping, and specify 10.1.1.1 as the source IP address of IGMP general
queries.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping general-query source-ip 10.1.1.1
Related commands
igmp-snooping enable
igmp-snooping group-limit
Use igmp-snooping group-limit to set the maximum number of multicast groups that a port can join.
Use undo igmp-snooping group-limit to restore the default.
Syntax
igmp-snooping group-limit limit [ vlan vlan-list ]
undo igmp-snooping group-limit [ vlan vlan-list ]