R0106-HP MSR Router Series IP Multicast Command Reference(V7)

40
source-address: Specifies a multicast source by its IP address. If you do not specify any multicast source,
the command removes the dynamic IGMP snooping forwarding entries for all multicast sources.
all: Specifies all multicast groups.
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
Examples
# Remove the dynamic IGMP snooping forwarding entries for all multicast groups.
<Sysname> reset igmp-snooping group all
Related commands
display igmp-snooping group
reset igmp-snooping router-port
Use reset igmp-snooping router-port to remove dynamic router ports.
Syntax
reset igmp-snooping router-port { all | vlan vlan-id ]
Views
User view
Predefined user roles
network-admin
Parameters
all: Specifies all VLANs.
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
Examples
# Remove all dynamic router ports.
<Sysname> reset igmp-snooping router-port all
Related commands
display igmp-snooping router-port
reset igmp-snooping statistics
Use reset igmp-snooping statistics to clear statistics for the IGMP messages learned through IGMP
snooping.
Syntax
reset igmp-snooping statistics
Views
User view
Predefined user roles
network-admin
Examples
# Clear the statistics for all IGMP messages learned by IGMP snooping.