R0106-HP MSR Router Series IP Multicast Command Reference(V7)

41
<Sysname> reset igmp-snooping statistics
Related commands
display igmp-snooping statistics
router-aging-time (IGMP-snooping view)
Use router-aging-time to set the global aging timer for dynamic router ports.
Use undo router-aging-time to restore the default.
Syntax
router-aging-time interval
undo router-aging-time
Default
The global aging timer for dynamic router ports is 260 seconds.
Views
IGMP-snooping view
Predefined user roles
network-admin
Parameters
interval: Specifies the aging timer for dynamic router ports, in the range of 1 to 1000 seconds.
Usage guidelines
The global configuration is effective on all VLANs. It has lower priority than the configuration made in a
specific VLAN.
Examples
# Set the global aging timer for dynamic router ports to 100 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] router-aging-time 100
Related commands
igmp-snooping router-aging-time
source-deny (IGMP-snooping view)
Use source-deny to enable multicast source port filtering on ports to filter out all the received multicast
data packets. This allows the ports to connect to only multicast receivers rather than to multicast sources.
Use undo source-deny to disable multicast source port filtering on one or multiple ports.
Syntax
source-deny port interface-list
undo source-deny port interface-list