R0106-HP MSR Router Series IP Multicast Command Reference(V7)

Default

Multicast source port filtering is disabled, and the ports can connect to both multicast sources and

multicast receivers.

Views

IGMP-snooping view

Predefined user roles

network-admin

Parameters

port interface-list: Specifies a space-separated list of port items. Each item specifies a port by its port type

and number or a range of ports in the form of start-interface-type interface-number to end-interface-type

interface-number.

Usage guidelines

The command is supported on the following hardware:

MSR routers installed with the Layer 2 switching module HMIM 24GSW, HMIM 24GSW-POE, or HMIM

8GSW.

The global configuration is effective on all specified ports. It has the same priority as the configuration

made on the current port.

Examples

# Enable multicast source port filtering on ports GigabitEthernet 2/1/1 through GigabitEthernet 2/1/4.

<Sysname> system-view

[Sysname] igmp-snooping

[Sysname-igmp-snooping] source-deny port gigabitethernet 2/1/1 to gigabitethernet 2/1/4

Related commands

igmp-snooping source-deny

version (IGMP-snooping view)

Use version to specify the IGMP snooping version for VLANs.

Use undo version to restore the default.

Syntax

version version-number vlan vlan-list

undo version vlan vlan-list