R0106-HP MSR Router Series IP Multicast Command Reference(V7)

46
Field Descri
p
tion
Local address Local IP address.
Remote address Remote end IP address. This field is displayed when the interface is vlink type.
Reference Number of times that the address has been referenced.
State Status of the interface address: NORMAL or DEL.
display multicast boundary
Use display multicast boundary to display multicast boundary information.
Syntax
display multicast [ vpn-instance vpn-instance-name ] boundary [ group-address [ mask-length | mask ] ]
[ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify any VPN instance, the command displays multicast boundary
information on the public network.
group-address: Specifies a multicast group address in the range of 224.0.0.0 to 239.255.255.255. If
you do not specify any multicast group, the command displays the multicast boundary information of all
multicast groups.
mask-length: Specifies an address mask length in the range of 4 to 32. The default is 32.
mask: Specifies an address mask. The default is 255.255.255.255.
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify any interface, the command displays the multicast boundary information on all interfaces.
Examples
# Display the multicast boundary information of all multicast groups on all interfaces on the public
network.
<Sysname> display multicast boundary
Boundary Interface
224.1.1.0/24 GE2/1/1
239.2.2.0/24 GE2/1/2
Table 12 Command output
Field Descri
p
tion
Boundary Multicast group that corresponds to the multicast boundary.
Interface Boundary interface that corresponds to the multicast boundary.