R0106-HP MSR Router Series IP Multicast Command Reference(V7)

59
longest-match (MRIB view)
Use longest-match to configure the device to select the RPF route based on the longest prefix match
principle.
Use undo longest-match to restore the default.
Syntax
longest-match
undo longest-match
Default
The device selects the route with the highest priority as the RPF route.
Views
MRIB view
Predefined user roles
network-admin
Examples
# Configure the device to select the RPF route based on the longest prefix match principle on the public
network.
<Sysname> system-view
[Sysname] multicast routing
[Sysname-mrib] multicast longest-match
multicast boundary
Use multicast boundary to configure a multicast forwarding boundary.
Use undo multicast boundary to remove a multicast forwarding boundary.
Syntax
multicast boundary group-address { mask-length | mask }
undo multicast boundary { group-address { mask-length | mask } | all }
Default
No multicast forwarding boundary is configured.
Views
Interface view
Predefined user roles
network-admin
Parameters
group-address: Specifies a multicast group address in the range of 224.0.0.0 to 239.255.255.255.
mask-length: Specifies an address mask length in the range of 4 to 32.
mask: Specifies an address mask.
all: Specifies all forwarding boundaries configured on the interface.