R0106-HP MSR Router Series IP Multicast Command Reference(V7)
70
Field Descri
p
tion
Group address/Group Multicast group address.
Member state
Member host states:
• Delay—The member host has joined a group and started a
delay timer.
• Idle—The member host has joined a group, but didn't start a
delay timer.
Expires
Remaining delay time for the member host to send a responding
report, where "off" means that the delay timer is disabled.
Group mode
Multicast source filtering modes:
• Include.
• Exclude.
Source list
List of multicast sources in group membership database
maintained by the IGMP proxy.
sources in total Total number of multicast sources.
display igmp proxy routing-table
Use display igmp proxy routing-table to display information about the multicast routing entries learned
through the IGMP proxy.
Syntax
display igmp [ vpn-instance vpn-instance-name ] proxy routing-table [ source-address [ mask
{ mask-length | mask } ] | group-address [ mask { mask-length | mask } ] ] * [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to
31 characters. If you do not specify any VPN instance, this command displays information about IGMP
proxy routing entries learned through the IGMP proxy on the public network.
source-address: Specifies a multicast source address. If you do not specify any multicast source, the
command displays information about IGMP proxy routing entries learned through the IGMP proxy for all
multicast sources.
group-address: Specifies a multicast group address, in the range of 224.0.1.0 to 239.255.255.255. If
you do not specify any multicast group, the commands display information about IGMP proxy routing
entries learned through the IGMP proxy for all groups.
mask-length: Specifies a mask length of the multicast group address or multicast source address. For a
multicast source address, the value range for this argument is 0 to 32. For a multicast group address, the
value range for this argument is 4 to 32. The default value is 32 in both cases.