R0106-HP MSR Router Series IP Multicast Command Reference(V7)

77
Use to undo igmp proxy enable to disable IGMP proxying on the interface.
Syntax
igmp proxy enable
undo igmp proxy enable
Default
IGMP proxying is disabled.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
You must enable IP multicast routing for the relevant instance before you execute this command.
Otherwise, this command does not take effect.
Examples
# Enable IP multicast routing on the public network, and enable IGMP proxying on GigabitEthernet
2/1/1.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] igmp proxy enable
Related commands
multicast routing
igmp proxy forwarding
Use igmp proxy forwarding to enable multicast forwarding on a non-querier.
Use undo igmp proxy forwarding to disable a non-querier to forward multicast packets.
Syntax
igmp proxy forwarding
undo igmp proxy forwarding
Default
The forwarding capability for a non-querier is disabled.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
Typically, only IGMP queriers can forward multicast traffic but non-queriers cannot. This prevents
multicast data from being repeatedly forwarded. If a downstream interface on the IGMP proxy device