R0106-HP MSR Router Series IP Multicast Command Reference(V7)

80
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] igmp version 1
proxy multipath (IGMP view)
Use proxy multipath to enable load splitting on the IGMP proxy.
Use undo proxy multipath to disable load splitting on the IGMP proxy.
Syntax
proxy multipath
undo proxy multipath
Default
The load splitting function is disabled on the IGMP proxy.
Views
IGMP view
Predefined user roles
network-admin
Usage guidelines
When you enable IGMP proxying for multiple interfaces on the IGMP proxy device, one of the following
occurs:
• If load splitting is disabled, only the interface with the highest IP address forwards the multicast
data.
• If load splitting is enabled, the IGMP proxying-enabled interfaces share the multicast traffic on a
per-group basis.
Examples
# Enable load splitting on the IGMP proxy device.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] proxy multipath
reset igmp group
Use reset igmp group to remove dynamic IGMP group entries.
Syntax
reset igmp [ vpn-instance vpn-instance-name ] group { all | interface interface-type interface-number
{ all | group-address [ mask { mask | mask-length } ] [ source-address [ mask { mask | mask-length } ] ] } }
Views
User view
Predefined user roles
network-admin