R0106-HP MSR Router Series IP Multicast Command Reference(V7)

84
Syntax
bidir-pim enable
undo bidir-pim enable
Default
BIDIR-PIM is disabled.
Views
PIM view
Predefined user roles
network-admin
Usage guidelines
This command takes effect only after you enable IP multicast routing in the public network or the VPN
instance.
Examples
# Enable IP multicast routing on the public network, and enable BIDIR-PIM.
<Sysname> system-view
[Sysname] multicast routing
[Sysname-mrib] quit
[Sysname] pim
[Sysname-pim] bidir-pim enable
Related commands
multicast routing
bidir-rp-limit (PIM view)
Use bidir-rp-limit to configure the maximum number of BIDIR-PIM RPs.
Use undo bidir-rp-limit to restore the default.
Syntax
bidir-rp-limit limit
undo bidir-rp-limit
Default
The maximum number of RPs in BIDIR-PIM is 6.
Views
PIM view
Predefined user roles
network-admin
Parameters
limit: Specifies the maximum number of RPs in BIDIR-PIM, in the range of 1 to the number allowed by the
system.
The following matrix shows the value ranges for the limit argument: