R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

62
Syntax
display interface [ vlan-interface ] [ brief [ down ] ]
display interface [ vlan-interface [ interface-number ] ] [ brief [ description ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan-interface: Specifies a VLAN interface.
interface-number: Specifies a VLAN interface number. If you do not specify this argument, this command
displays information about all VLAN interfaces.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
down: Displays VLAN interfaces in a down state and their down causes. If you do not specify this
keyword, the command displays information about VLAN interfaces in all states.
description: Displays complete interface descriptions. If you do not specify this keyword, the command
displays only the first 27 characters of interface descriptions.
Examples
# Display information for VLAN-interface 10.
<Sysname> display interface vlan-interface 10
Vlan-interface10
Current state: UP
Line protocol state: UP
Description: Vlan-interface10 Interface
Bandwidth: 100000kbps
Maximum Transmit Unit: 1500
Internet Address is 192.168.1.54/24 Primary
IP Packet Frame Type:PKTFMT_ETHNT_2, Hardware Address: 0023-89b6-d613
IPv6 Packet Frame Type:PKTFMT_ETHNT_2, Hardware Address: 0023-89b6-d613
Last clearing of counters: Never
# Display brief information for VLAN-interface 2.
<Sysname> display interface vlan-interface 2 brief
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
Vlan2 DOWN DOWN --
Table 22 Command output
Field Description
Vlan-interface2 VLAN interface name.