R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

65
dynamic: Displays the number of dynamic VLANs and the ID for each dynamic VLAN. The dynamic
VLANs are distributed by a RADIUS server.
reserved: Displays information about the reserved VLANs. Protocol modules determine which VLANs are
reserved according to function implementation. The reserved VLANs provide services for protocol
modules. You cannot configure reserved VLANs.
static: Displays the number of static VLANs and the ID for each static VLAN. The static VLANs are
manually created.
Examples
# Display VLAN 2 information.
<Sysname> display vlan 2
VLAN ID: 2
VLAN type: Static
Route interface: Not configured
Description: VLAN 0002
Name: VLAN 0002
Tagged ports: None
Untagged ports:
GigabitEthernet2/1/1 GigabitEthernet2/1/2 GigabitEthernet2/1/3
# Display VLAN 3 information.
<Sysname> display vlan 3
VLAN ID: 3
VLAN type: static
Route interface: Configured
IPv4 address: 1.1.1.1
IPv4 subnet mask: 255.255.255.0
Description: VLAN 0003
Name: VLAN 0003
Tagged ports: None
Untagged ports: None
Table 23 Command output
Field Description
VLAN type VLAN type, static or dynamic.
Route interface
Whether the VLAN interface is configured.
• Not configured.
• Configured.
Description Description of the VLAN.
Name Name configured for the VLAN.
IP address
Primary IP address of the VLAN interface (available only when an IP
address is configured for the VLAN interface). To display secondary
IP addresses, use the display interface vlan-interface command in
any view or the display this command in VLAN interface view.
Subnet mask
Subnet mask of the primary IP address (available only when an IP
address is configured for the VLAN interface).
Tagged ports Ports through which VLAN packets are sent tagged.