R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

82
Default
The TPID value in CVLAN tags is 0x8100.
Views
System view
Predefined user roles
network-admin
Parameters
customer-tag: Sets the TPID value in the CVLAN tag.
hex-value: Sets a hexadecimal TPID value. The value range is 0x0001 to 0xFFFF, excluding the reserved
EtherType values listed in Table 27.
Table 27 Reserved Ethe
rType values
Protocol t
yp
e Value
ARP 0x0806
PUP 0x0200
RARP 0x8035
IP 0x0800
IPv6 0x86DD
PPPoE 0x8863/0x8864
MPLS 0x8847/0x8848
IPX/SPX 0x8137
IS-IS 0x8000
LACP 0x8809
LLDP 0x88CC
802.1X 0x888E
802.1ag 0x8902
Cluster 0x88A7
Reserved 0xFFFD/0xFFFE/0xFFFF
Examples
# Set the global TPID value in CVLAN tags to 0x8200.
<Sysname> system-view
[Sysname] qinq ethernet-type customer-tag 8200
qinq ethernet-type service-tag
Use qinq ethernet-type service-tag to configure the TPID value in SVLAN tags.
Use undo qinq ethernet-type service-tag to restore the default TPID value in SVLAN tags.
Syntax
qinq ethernet-type service-tag