R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

101
Field Descri
p
tion
LLDP-MED extend TLV
LLDP-MED TLVs:
• Capabilities TLV.
• Network Policy TLV.
• Extended Power-via-MDI TLV.
• Location Identification TLV.
• Inventory TLV.
Inventory TLV
Inventory TLVs:
• Hardware Revision TLV.
• Firmware Revision TLV.
• Software Revision TLV.
• Serial Number TLV.
• Manufacturer Name TLV.
• Model name TLV.
• Asset ID TLV.
lldp admin-status
Use lldp admin-status to specify the LLDP operating mode.
Use undo lldp admin-status to restore the default.
Syntax
In Layer 2 Ethernet interface view:
lldp admin-status { disable | rx | tx | txrx }
undo lldp admin-status
In Layer 3 Ethernet interface view:
lldp [ agent { nearest-customer | nearest-nontpmr } ] admin-status { disable | rx | tx | txrx }
undo lldp [ agent { nearest-customer | nearest-nontpmr } ] admin-status
In Layer 3 aggregate interface view:
lldp agent { nearest-customer | nearest-nontpmr } admin-status { disable | rx | tx | txrx }
undo lldp agent { nearest-customer | nearest-nontpmr } admin-status
Default
The nearest bridge agent operates in txrx mode, and the nearest customer bridge agent and nearest
non-TPMR bridge agent operate in disable mode.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, Layer 3 aggregate interface view
Predefined user roles
network-admin
Parameters
agent: Specifies an LLDP agent type. If no agent type is specified in Ethernet interface view, the command
configures the operating mode for nearest bridge agents.