R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

106
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] lldp encapsulation snap
lldp fast-count
Use lldp fast-count to set the number of LLDP frames sent each time fast LLDP frame transmission is
triggered.
Use undo lldp fast-count to restore the default.
Syntax
lldp fast-count count
undo lldp fast-count
Default
The number is 4.
Views
System view
Predefined user roles
network-admin
Parameters
count: Sets the number of LLDP frames sent each time fast LLDP frame transmission is triggered. The value
range is 1 to 8.
Examples
# Configure the device to send five LLDP frames each time fast LLDP frame transmission is triggered.
<Sysname> system-view
[Sysname] lldp fast-count 5
lldp global enable
Use lldp global enable to enable LLDP globally.
Use undo lldp global enable to disable LLDP globally.
Syntax
lldp global enable
undo lldp global enable
Default
LLDP is disabled globally.
Views
System view
Predefined user roles
network-admin
Usage guidelines
LLDP takes effect only when LLDP is enabled both globally and on the port.