R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

110
Examples
# Configure LLDP to operate in service bridge mode.
<Sysname> system-view
[Sysname] lldp mode service-bridge
Related commands
lldp global enable
lldp notification med-topology-change enable
Use lldp notification med-topology-change enable to enable LLDP-MED trapping.
Use undo lldp notification med-topology-change enable to disable LLDP-MED trapping.
Syntax
lldp notification med-topology-change enable
undo lldp notification med-topology-change enable
Default
LLDP-MED trapping is disabled on ports.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
Examples
# Enable LLDP-MED trapping for GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] lldp notification med-topology-change enable
lldp notification remote-change enable
Use lldp notification remote-change enable to enable LLDP trapping.
Use undo lldp notification remote-change enable to disable LLDP trapping.
Syntax
In Layer 2 Ethernet interface view:
lldp notification remote-change enable
undo lldp notification remote-change enable
In Layer 3 Ethernet interface view:
lldp [ agent { nearest-customer | nearest-nontpmr } ] notification remote-change enable
undo lldp [ agent { nearest-customer | nearest-nontpmr } ] notification remote-change enable
In Layer 3 aggregate interface view:
lldp agent { nearest-customer | nearest-nontpmr } notification remote-change enable
undo lldp agent { nearest-customer | nearest-nontpmr } notification remote-change enable