R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

115
nearest-customer: Specifies nearest customer bridge agents.
nearest-nontpmr: Specifies nearest non-TPMR bridge agents.
all: Advertises all TLVs of a specific type.
• Enables the interface to advertise the following TLVs:
{ All basic LLDP TLVs if the all keyword is specified for basic-tlv.
{ All IEEE 802.1 organizationally specific LLDP TLVs if the all keyword is specified for dot1-tlv.
{ All IEEE 802.3 organizationally specific LLDP TLVs if the all keyword is specified for dot3-tlv.
• Enables the interface to advertise all LLDP-MED TLVs except location identification TLVs if the all
keyword is specified for med-tlv.
basic-tlv: Advertises basic LLDP TLVs.
management-address-tlv [ ip-address ]: Advertises management address TLVs. ip-address specifies the
management address to be advertised. By default:
• For a Layer 2 Ethernet interface, the management address is the primary IP address of the VLAN
interface that meets the following requirements:
{ In up state
{ The corresponding VLAN ID is the lowest among the VLANs permitted on the port.
If none of the VLAN interfaces of the permitted VLANs is assigned an IP address or all VLAN
interfaces are down, the MAC address of the port will be advertised.
• For a Layer 3 Ethernet or aggregate interface, the management address is its own IP address. If no
IP address is configured for the Layer 3 Ethernet or aggregate interface, the MAC address of the
port will be advertised.
port-description: Advertises port description TLVs.
system-capability: Advertises system capabilities TLVs.
system-description: Advertises system description TLVs.
system-name: Advertises system name TLVs.
dot1-tlv: Advertises IEEE 802.1 organizationally specific LLDP TLVs.
port-vlan-id: Advertises port VLAN ID TLVs.
protocol-vlan-id [ vlan-id ]: Advertises port and protocol VLAN ID TLVs. The vlan-id argument specifies a
VLAN ID in the TLVs to be advertised. The VLAN ID is in the range of 1 to 4094, and the default is the
lowest VLAN ID on the port.
vlan-name [ vlan-id ]: Advertises VLAN name TLVs. The vlan-id argument specifies a VLAN ID in the TLVs
to be advertised. The VLAN ID is in the range of 1 to 4094, and the default is the lowest VLAN ID on the
port.
management-vid [ mvlan-id ]: Advertises the management VLAN ID TLV. The mvlan-id argument specifies
a management VLAN ID in the TLVs to be advertised. The management VLAN ID is in the range of 1 to
4094. If no management VLAN ID is specified, the value 0 is advertised, which means that the LLDP
agent is not configured with a management VLAN ID.
dot3-tlv: Advertises IEEE 802.3 organizationally specific LLDP TLVs.
link-aggregation: Advertises link aggregation TLVs.
mac-physic: Advertises MAC/PHY configuration/status TLVs.
max-frame-size: Advertises maximum frame size TLVs.