R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

11
display interface
Use display interface to display aggregate interface information.
Syntax
display interface [ route-aggregation [ interface-number ] ] [ brief [ description | down ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
route-aggregation: Displays information about Layer 3 aggregate interfaces.
interface-number: Specifies an existing aggregate interface number. The value range for the
interface-number argument is the set of all existing aggregate interface numbers.
brief: Displays brief interface information. If you do not specify this keyword, this command displays
detailed interface information.
description: Displays complete interface descriptions. If you do not specify this keyword, the command
displays only the first 27 characters of interface descriptions.
down: Displays information about interfaces in the down state and the causes for the down state. If you
do not specify this keyword, this command displays information about interfaces in all states.
Usage guidelines
If route-aggregation is specified without any interface number specified, this command displays
information about all Layer 3 aggregate interfaces.
If route-aggregation interface-number is specified, this command displays information about the
specified Layer 3 aggregate interface.
Examples
# Display detailed information about Layer 3 aggregate interface Route-Aggregation 1.
<Sysname> display interface route-aggregation 1
Route-Aggregation1
Current state: UP
Line protocol state: UP
Description: Route-Aggregation1 Interface
Bandwidth: 2000000kbps
Maximum Transmit Unit: 1500
Internet Address is 10.1.1.2/24 Primary
IP Packet Frame Type:PKTFMT_ETHNT_2, Hardware Address: 0008-6757-5685
IPv6 Packet Frame Type:PKTFMT_ETHNT_2, Hardware Address: 0008-6757-5685
Output queue - Urgent queuing: Size/Length/Discards 0/100/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - FIFO queuing: Size/Length/Discards 0/75/0
Unknown-speed mode, unknown-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation