R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

Last clearing of counters: Never

Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec

Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec

0 packets input, 0 bytes, 0 drops

0 packets output, 0 bytes, 0 drops

# Display brief information about Layer 3 aggregate interface Route-Aggregation 1.

<Sysname> display interface route-aggregation 1 brief

Brief information on interface(s) under route mode:

Link: ADM - administratively down; Stby - standby

Protocol: (s) - spoofing

Interface Link Protocol Main IP Description

RAGG1 UP UP --

Table 3 Command output

Field Descri

tion

Route-Aggregation1 Layer 3 aggregate interface name.

Current state

Layer 3 aggregate interface status:

• DOWN (Administratively down)—The interface is

administratively shut down with the shutdown

command.

• DOWN—The interface is administratively up but

physically down (possibly because no physical link

is present or the link is faulty).

• UP—The Ethernet interface is both administratively

and physically up.

IP Packet Frame Type

IPv4 packet frame format.

The value PKTFMT_ETHNT_2 indicates that packets

are encapsulated in Ethernet II format.

FIFO queuing First-in first-out queuing.

Size Number of packets in the queue.

Length Length of the queue.

Discards Number of discarded packets.

Bandwidth Expected bandwidth of the interface.

Unknown-speed mode, unknown-duplex mode The interface speed and duplex mode are unknown.

Last clearing of counters

Time when the reset counters interface command was

last used to clear the interface statistics.

Never indicates the reset counters interface command

has never been used on the interface since the

device's startup.

Last 300 seconds input/output rate Average input/output rate over the last 300 seconds.

Input/Output (total) Statistics of all packets received/sent on the interface.

Input/Output (normal)

Statistics of all normal packets received/sent on the

interface.

Line protocol state Link layer state of the interface.