R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

13
Field Descri
p
tion
Internet protocol processing
IP packet processing.
Disabled indicates that IP packets cannot be
processed.
For an interface configured with an IP address, this
field changes to Internet Address is.
Brief information on interface(s) under route mode Brief information about Layer 3 interfaces.
Link: ADM - administratively down; Stby - standby
Link status:
• ADM—The interface has been administratively
shut down. To recover its physical layer state, run
the undo shutdown command.
• Stby—The interface is operating as a backup
interface.
Protocol: (s) - spoofing
If the data link layer protocol state of an interface is
shown as UP, but its link is an on-demand link or not
present, its protocol attribute includes the spoofing
flag (the letter s in parentheses).
Interface Abbreviated interface name.
Link
Physical link state of the interface:
• UP—The interface is physically up.
• DOWN—The interface is physically down.
• ADM—The interface has been administratively
shut down. To bring up the interface, use the undo
shutdown command.
• Stby—The interface is operating as a backup
interface.
Protocol
Data link layer protocol state of an interface:
• UP—The data link layer protocol is up on the
interface.
• DOWN—The data link layer protocol is down on
the interface.
• UP(s)—The data link layer protocol state of an
interface is shown as UP, but its link is an
on-demand link or not present.
Description
Interface description configured by using the
description command.
• If the description keyword is not specified in the
display interface brief command, the Description
field displays only the first 27 characters of the
interface description.
• If the description keyword is specified in the
display interface brief command, the Description
field displays the complete interface description.
display lacp system-id
Use display lacp system-id to display the system ID of the local system.