R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

14
Syntax
display lacp system-id
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
You can use the lacp system-priority command to change the LACP priority of the local system. The LACP
priority value is specified in decimal format in the lacp system-priority command. However, it is
displayed as a hexadecimal value by the display lacp system-id command.
Examples
# Display the local system ID.
<Sysname> display lacp system-id
Actor System ID: 0x8000, 0000-fc00-6504
Table 4 Command output
Field Descri
p
tion
Actor System ID: 0x8000, 0000-fc00-6504
Local system ID, which contains the system LACP priority
(0x8000 in this sample output) and the system MAC address
(0000-FC00-6504 in this sample output).
Related commands
lacp system-priority
display link-aggregation load-sharing mode
Use display link-aggregation load-sharing mode to display global or group-specific link-aggregation
load sharing criteria.
Syntax
display link-aggregation load-sharing mode [ interface [ route-aggregation interface-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
route-aggregation: Displays the load sharing criterion or criteria of the aggregation group
corresponding to the specified Layer 3 aggregate interface.
interface-number: Specifies an existing aggregate interface number in the range of 1 to 8.