R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

16
Table 5 Command output
Field Descri
p
tion
Link-Aggregation Load-Sharing Mode
Global link-aggregation load sharing criteria.
• By default, the link-aggregation load sharing criteria for Layer 3
traffic, Layer 4 traffic, and MPLS traffic are displayed.
• If you have configured the global link-aggregation load sharing
criteria, the configured ones are displayed.
Route-Aggregation10 Load-Sharing
Mode
Link-aggregation load sharing criteria of the aggregation group
corresponding to aggregate interface Route-Aggregation 10.
• By default, the global link-aggregation load sharing criteria are
displayed.
• If you have configured link-aggregation load sharing criteria
especially for this aggregation group, the configured ones are
displayed.
Layer 3 traffic: destination-ip address,
source-ip address ip-protocol
Default link-aggregation load sharing criteria for Layer 3 traffic. In
this sample output, the criteria are the source and destination IP
addresses, and protocol type of packets.
MPLS traffic : mpls-label1
Default link-aggregation load sharing criteria for MPLS traffic. In
this sample output, the criterion is the Layer 1 MPLS label of
packets.
display link-aggregation member-port
Use display link-aggregation member-port to display detailed link aggregation information for the
specified member ports.
Syntax
display link-aggregation member-port [ interface-list ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-list: Specifies a list of link aggregation member ports, in the format interface-type
interface-number [ to interface-type interface-number ]. interface-type interface-number specifies an
interface by its type and number.
Usage guidelines
For a member port in a static aggregation group, which is unaware of information about the peer group,
this command displays the port number, port priority, and operational key of the local end only.
Examples
# Display detailed link aggregation information for GigabitEthernet 2/1/1, which is a member port of
a static aggregation group.
<Sysname> display link-aggregation member-port gigabitethernet 2/1/1