R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

Table 6 Command output

Field Descri

tion

Flags

LACP state flags. This field is one byte long, represented by ABCDEFGH from the

least significant bit to the most significant bit. The letter is present when its bit is 1

and absent when its bit is 0.

• A—Indicates whether LACP is enabled. 1 indicates enabled, and 0 indicates

disabled.

• B—Indicates the LACP short or long timeout. 1 indicates short timeout, and 0

indicates long timeout.

• C—Indicates whether the sending system considers that the link is aggregatable.

1 indicates yes, and 0 indicates no.

• D—Indicates whether the sending system considers that the link is synchronized.

1 indicates yes, and 0 indicates no.

• E—Indicates whether the sending system considers that the incoming frames are

collected. 1 indicates yes, and 0 indicates no.

• F—Indicates whether the sending system considers that the outgoing frames are

distributed. 1 indicates yes, and 0 indicates no.

• G—Indicates whether the sending system receives frames in the default state. 1

indicates yes, and 0 indicates no.

• H—Indicates whether the sending system receives frames in the expired state. 1

indicates yes, and 0 indicates no.

Aggregate Interface Aggregate interface to which the member port belongs.

Local Information about the local end.

Oper-key Operational key.

Flag LACP protocol state flag.

Remote Information about the remote end.

System ID

Remote end system ID, containing the system LACP priority and the system MAC

address.

Received LACP Packets Total number of LACP packets received.

Illegal Total number of illegal packets.

Sent LACP Packets Total number of LACP packets sent.

display link-aggregation summary

Use display link-aggregation summary to display the summary information for all aggregation groups.

Syntax

display link-aggregation summary

Views

Any view

Predefined user roles

network-admin

network-operator