R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

19
Usage guidelines
Information about the remote system for a static link aggregation group is displayed as none. This is
because static link aggregation groups are unaware of information about the peer groups.
Examples
# Display the summary information for all aggregation groups.
<Sysname> display link-aggregation summary
Aggregate Interface Type:
BAGG -- Bridge-Aggregation, BLAGG -- Blade-Aggregation, RAGG -- Route-Aggregation
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 000f-e267-6c6a
AGG AGG Partner ID Selected Unselected Share
Interface Mode Ports Ports Type
-------------------------------------------------------------------------------
BAGG1 S none 1 0 Shar
BAGG10 D 0x8000, 000f-e267-57ad 2 0 Shar
Table 7 Command output
Field Descri
p
tion
Aggregate Interface Type
Aggregate interface type:
• BAGG—Layer 2 aggregate interface. The router does not support Layer 2
aggregate interfaces in the current software version.
• RAGG—Layer 3 aggregate interface.
Aggregation Mode
Aggregation group type:
• S—Static link aggregation.
• D—Dynamic aggregation.
Loadsharing Type
Load sharing type:
• Shar—Load sharing.
• NonS—Non-load sharing.
Actor System ID
Local system ID, which contains the system LACP priority and the system MAC
address.
AGG Interface Type and number of the aggregate interface.
AGG Mode Aggregation group type.
Partner ID
System ID of the partner, which contains the system LACP priority and the
system MAC address.
Selected Ports Total number of Selected ports.
Unselected Ports Total number of Unselected ports.
Share Type Load sharing type.
display link-aggregation verbose
Use display link-aggregation verbose to display detailed information about the aggregation groups that
correspond to the aggregate interfaces.