R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

Syntax

display link-aggregation verbose [ route-aggregation [ interface-number ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

route-aggregation: Displays detailed information about the Layer 3 aggregation groups that correspond

to Layer 3 aggregate interfaces.

interface-number: Specifies an existing aggregate interface by its number in the range of 1 to 8.

Usage guidelines

If you specify only route-aggregation, this command displays information about all Layer 3 aggregation

groups.

If no aggregate interface type is specified, this command displays information about all aggregation

groups.

The route-aggregation keyword is available only after you create Layer 3 aggregate interfaces on the

device.

Examples

# Display detailed information about the aggregation group that corresponds to Layer 3 aggregate

interface Route-Aggregation 10, which is a dynamic aggregation group.

<Sysname> display link-aggregation verbose route-aggregation 10

Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing

Port Status: S -- Selected, U -- Unselected

Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,

D -- Synchronization, E -- Collecting, F -- Distributing,

G -- Defaulted, H -- Expired

Aggregate Interface: Route-Aggregation10

Aggregation Mode: Dynamic

Loadsharing Type: Shar

System ID: 0x8000, 000f-e267-6c6a

Local:

Port Status Priority Oper-Key Flag

--------------------------------------------------------------------------------

GE2/1/1 S 32768 2 {ACDEF}

GE2/1/2 S 32768 2 {ACDEF}

Remote:

Actor Partner Priority Oper-Key SystemID Flag

--------------------------------------------------------------------------------

GE2/1/1 1 32768 2 0x8000, 000f-e267-57ad {ACDEF}

GE2/1/2 2 32768 2 0x8000, 000f-e267-57ad {ACDEF}