R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

# Display detailed information about the aggregation group that corresponds to Layer 3 aggregate

interface Route-Aggregation 20, which is a static aggregation group.

<Sysname> display link-aggregation verbose route-aggregation 20

Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing

Port Status: S -- Selected, U -- Unselected

Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,

D -- Synchronization, E -- Collecting, F -- Distributing,

G -- Defaulted, H -- Expired

Aggregate Interface: Route-Aggregation20

Aggregation Mode: Static

Loadsharing Type: Shar

Port Status Priority Oper-Key

--------------------------------------------------------------------------------

GE2/1/1 U 32768 1

GE2/1/2 U 32768 1

GE2/1/3 U 32768 1

Table 8 Command output

Field Descri

tion

Loadsharing Type

Load sharing type:

• Shar—Load sharing.

• NonS—Non-load sharing.

Port Status Port state: Selected or Unselected.

Flags

LACP state flags. This field is one byte long, represented by ABCDEFGH from the

least significant bit to the most significant bit. The letter is present when its bit is 1

and absent when its bit is 0.

• A—Indicates whether LACP is enabled. 1 indicates enabled, and 0 indicates

disabled.

• B—Indicates the LACP short or long timeout. 1 indicates short timeout, and 0

indicates long timeout.

• C—Indicates whether the sending system considers that the link is aggregatable.

1 indicates yes, and 0 indicates no.

• D—Indicates whether the sending system considers that the link is synchronized.

1 indicates yes, and 0 indicates no.

• E—Indicates whether the sending system considers that the incoming frames are

collected. 1 indicates yes, and 0 indicates no.

• F—Indicates whether the sending system considers that the outgoing frames are

distributed. 1 indicates yes, and 0 indicates no.

• G—Indicates whether the sending system receives frames in the default state. 1

indicates yes, and 0 indicates no.

• H—Indicates whether the sending system receives frames in the expired state. 1

indicates yes, and 0 indicates no.

Aggregate Interface Name of the aggregate interface.

Aggregation Mode

Mode of the aggregation group:

• Static for static aggregation.

• Dynamic for dynamic aggregation.