R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

24
lacp period short
Use lacp period short to set the LACP timeout interval on a port to the short timeout interval (3 seconds),
and enable the peer end to send LACPDUs quickly.
Use undo lacp period to restore the default setting.
Syntax
lacp period short
undo lacp period
Default
The LACP timeout interval is the long timeout interval (90 seconds).
Views
Layer 3 Ethernet interface view
Predefined user roles
network-admin
Examples
# Set the LACP timeout interval on GigabitEthernet 2/1/1 to the short timeout interval (3 second).
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] lacp period short
lacp system-priority
Use lacp system-priority to set the system LACP priority.
Use undo lacp system-priority to restore the default setting.
Syntax
lacp system-priority system-priority
undo lacp system-priority
Default
The system LACP priority is 32768.
Views
System view
Predefined user roles
network-admin
Parameters
system-priority: Specifies the system LACP priority in the range of 0 to 65535. The smaller the value, the
higher the system LACP priority.
Examples
# Set the system LACP priority to 64.
<Sysname> system-view
[Sysname] lacp system-priority 64