R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

25
Related commands
link-aggregation port-priority
link-aggregation global load-sharing mode
Use link-aggregation global load-sharing mode to configure the global link-aggregation load sharing
criteria.
Use undo link-aggregation global load-sharing mode to restore the default setting.
Syntax
link-aggregation global load-sharing mode { destination-ip | destination-port | source-ip |
source-port }
undo link-aggregation global load-sharing mode
Views
System view
Predefined user roles
network-admin
Parameters
destination-ip: Performs load sharing in link aggregation groups based on destination IP address.
destination-port: Performs load sharing in link aggregation groups based on destination port.
source-ip: Performs load sharing in link aggregation groups based on source IP address.
source-port: Performs load sharing in link aggregation groups based on source port.
Usage guidelines
The load sharing criteria that you configure overwrite the previous criteria.
If unsupported load sharing criteria are configured, an error prompt appears.
Examples
# Configure the destination IP address as the global link-aggregation load sharing criterion.
<Sysname> system-view
[Sysname] link-aggregation global load-sharing mode destination-ip
Related commands
link-aggregation load-sharing mode
link-aggregation lacp traffic-redirect-notification enable
Use link-aggregation lacp traffic-redirect-notification enable to enable link-aggregation traffic
redirection.
Use undo link-aggregation lacp traffic-redirect-notification enable to disable link-aggregation traffic
redirection.
Syntax
link-aggregation lacp traffic-redirect-notification enable
undo link-aggregation lacp traffic-redirect-notification enable