R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

30
Examples
# Configure the minimum number of Selected ports as 3 in the aggregation group that corresponds to
Layer 3 aggregate interface Route-Aggregation 1.
<Sysname> system-view
[Sysname] interface route-aggregation 1
[Sysname-Route-Aggregation1] link-aggregation selected-port minimum 3
Related commands
link-aggregation selected-port maximum
mtu
Use mtu to set the MTU of a Layer 3 aggregate interface or subinterface.
Use undo mtu to restore the default setting.
Syntax
mtu size
undo mtu
Default
The MTU for Layer 3 aggregate interfaces and subinterfaces is 1500 bytes.
Views
Layer 3 aggregate interface view, Layer 3 aggregate subinterface view
Predefined user roles
network-admin
Parameters
size: Specifies the maximum transmission unit (MTU) in bytes.
Examples
# Set the MTU of Layer 3 aggregate interface Route-Aggregation 1 to 1430 bytes.
<Sysname> system-view
[Sysname] interface route-aggregation 1
[Sysname-Route-Aggregation1] mtu 1430
Related commands
display interface
port link-aggregation group
Use port link-aggregation group to assign an Ethernet interface to an aggregation group.
Use undo port link-aggregation group to remove an Ethernet interface from the aggregation group to
which it belongs.
Syntax
port link-aggregation group number
undo port link-aggregation group