R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

31
Default
An Ethernet interface does not belong to any aggregation group.
Views
Layer 3 Ethernet interface view
Predefined user roles
network-admin
Parameters
number: Specifies the number of the aggregate interface that corresponds to an aggregation group. The
value range is 1 to 8.
Usage guidelines
An Ethernet interface can belong to only one aggregation group.
Examples
# Assign Layer 3 Ethernet interface GigabitEthernet 2/1/2 to Layer 3 aggregation group 2.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/2
[Sysname-GigabitEthernet2/1/2] port link-aggregation group 2
reset counters interface
Use reset counters interface to clear statistics for the specified aggregate interfaces.
Syntax
reset counters interface [ route-aggregation [ interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
route-aggregation: Clears statistics for Layer 3 aggregate interfaces.
interface-number: Specifies an aggregate interface number in the range of 1 to 8.
Usage guidelines
If only the route-aggregation keyword is specified, the command clears the statistics for all Layer 3
aggregate interfaces.
If the route-aggregation interface-number option is specified, the command clears the statistics for the
specified Layer 3 aggregate interface.
The route-aggregation keyword becomes available only after you create Layer 3 aggregate interfaces
on the device.
Examples
# Clear statistics for Layer 3 aggregate interface Route-Aggregation 1.
<Sysname> reset counters interface route-aggregation 1