R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

1
Port isolation commands
The commands are supported on the following hardware:
MSR routers installed with the Layer 2 switching module SIC 4GSW, SIC 4GSWP, DSIC 9FSW, DSIC
9FSWP, HMIM-24GSW, HMIM 24GSW-POE, or HMIM-8GSW.
In this chapter, "MSR2000" refers to MSR2003. "MSR3000" collectively refers to MSR3012, MSR3024,
MSR3044, MSR3064. "MSR4000" collectively refers to MSR4060 and MSR4080.
display port-isolate group
Use display port-isolate group to display port isolation group information.
Syntax
display port-isolate group
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display port isolation group information.
<Sysname> display port-isolate group
Port isolation group information:
Group ID: 1
Group members:
GigabitEthernet2/1/2
Table 9 Command output
Field Description
Group ID Isolation group number.
Group members
Isolated ports in the isolation group. No ports indicates that
the isolation group contains no isolated ports.
Related commands
port-isolate enable
port-isolate enable
Use port-isolate enable to assign a port to the isolation group.
Use undo port-isolate enable to remove a port from the isolation group.