R0106-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V7)

60
Views
VLAN interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you use it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies or system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to restore their default
settings. If your restoration attempt still fails, follow the error message instructions to resolve the problem.
Examples
# Restore the default settings for VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] default
description
Use description to configure the description for a VLAN or VLAN interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
For a VLAN, the description is VLAN vlan-id, which specifies the ID of the VLAN. For example, the default
description of VLAN 100 is VLAN 0100.
For a VLAN interface, the description is the name of the interface. For example, Vlan-interface1
Interface.
Views
VLAN view, VLAN interface view
Predefined user roles
network-admin
Parameters
text: Specifies a description for a VLAN or VLAN interface, a string of 1 to 255 characters. The string can
include case-sensitive letters, digits, special symbols (see Table 21)
, spaces, and other Unicode
characters and symbols.