R0106-HP MSR Router Series Layer 2 - LAN Switching Configuration Guide(V7)

100
Table 9 Reserved EtherType values
Protocol t
yp
e Value
ARP 0x0806
PUP 0x0200
RARP 0x8035
IP 0x0800
IPv6 0x86DD
PPPoE 0x8863/0x8864
MPLS 0x8847/0x8848
IPX/SPX 0x8137
IS-IS 0x8000
LACP 0x8809
LLDP 0x88CC
802.1X 0x888E
802.1ag 0x8902
Cluster 0x88A7
Reserved 0xFFFD/0xFFFE/0xFFFF
Configuring the CVLAN TPID value
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Set the CVLAN TPID.
qinq ethernet-type customer-tag
hex-value
The default setting is 0x8100.
Configuring the SVLAN TPID value
Configure SVLAN TPID on the service provider-side ports of the PEs.
To configure the SVLAN TPID on a service provider-side port:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter Layer 2 Ethernet interface
view.
interface interface-type
interface-number
N/A
3. Set the SVLAN TPID.
qinq ethernet-type service-tag
hex-value
The default setting is 0x8100.