R0106-HP MSR Router Series Layer 2 - LAN Switching Configuration Guide(V7)

114
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Set the LLDP reinitialization
delay.
lldp timer reinit-delay delay The default setting is 2 seconds.
Enabling LLDP polling
With LLDP polling enabled, a device periodically searches for local configuration changes. When the
device detects a configuration change, it sends LLDP frames to inform neighboring devices of the change.
To enable LLDP polling:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter Layer 2/Layer 3
Ethernet interface view, or
Layer 3 aggregate interface
view.
interface interface-type interface-number N/A
3. Enable LLDP polling and set
the polling interval.
• In Layer 2 Ethernet interface view:
lldp check-change-interval interval
• In Layer 3 Ethernet interface view:
lldp [ agent { nearest-customer |
nearest-nontpmr } ]
check-change-interval interval
• In Layer 3 aggregate interface view:
lldp agent { nearest-customer |
nearest-nontpmr }
check-change-interval interval
By default, LLDP polling is
disabled.
Configuring the advertisable TLVs
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter Layer 2/Layer 3
Ethernet interface view, or
Layer 3 aggregate interface
view.
interface interface-type interface-number N/A