R0106-HP MSR Router Series Layer 2 - LAN Switching Configuration Guide(V7)

115
Step Command Remarks
3. Configure the advertisable
TLVs (in Layer 2 Ethernet
interface view).
lldp tlv-enable { basic-tlv { all |
port-description | system-capability |
system-description | system-name |
management-address-tlv [ ip-address ] } |
dot1-tlv { all | port-vlan-id |
link-aggregation | protocol-vlan-id [ vlan-id ]
| vlan-name [ vlan-id ] | management-vid
[ mvlan-id ] } | dot3-tlv { all | mac-physic |
max-frame-size | power } | med-tlv { all |
capability | inventory | network-policy |
power-over-ethernet | location-id
{ civic-address device-type country-code
{ ca-type ca-value }&<1-10> | elin-address
tel-number } } }
By default, nearest bridge
agents can advertise all
types of LLDP TLVs except
the location identification
TLV, port and protocol
VLAN ID TLVs, VLAN
name TLVs, and
management VLAN ID
TLVs.
4. Configure the advertisable
TLVs (in Layer 3 Ethernet
interface view).
• lldp tlv-enable { basic-tlv { all |
port-description | system-capability |
system-description | system-name |
management-address-tlv [ ip-address ] }
| dot1-tlv { all | link-aggregation } |
dot3-tlv { all | mac-physic |
max-frame-size | power } | med-tlv { all
| capability | inventory |
power-over-ethernet | location-id
{ civic-address device-type country-code
{ ca-type ca-value }&<1-10> |
elin-address tel-number } } }
• lldp agent { nearest-nontpmr |
nearest-customer } tlv-enable { basic-tlv
{ all | port-description |
system-capability | system-description |
system-name | management-address-tlv
[ ip-address ] } | dot1-tlv { all |
link-aggregation } }
By default:
• Nearest bridge agents
can advertise all types
of LLDP TLVs (only link
aggregation TLV in
802.1
organizationally
specific TLVs) except
network policy TLVs.
• Nearest non-TPMR
bridge agents
advertise no TLVs.
• Nearest customer
bridge agents can
advertise basic TLVs
and IEEE 802.1
organizationally
specific TLVs (only link
aggregation TLV).
5. Configure the advertisable
TLVs (in Layer 3 aggregate
interface view).
lldp agent { nearest-nontpmr |
nearest-customer } tlv-enable basic-tlv { all |
management-address-tlv [ ip-address ] |
port-description | system-capability |
system-description | system-name }
By default:
• Nearest non-TPMR
bridge agents
advertise no TLVs.
• Nearest customer
bridge agents can
advertise only basic
TLVs.
Nearest bridge agents
are not supported on
Layer 3 aggregate
interfaces.
Configuring the management address and its encoding format
LLDP encodes management addresses in numeric or string format in management address TLVs.