R0106-HP MSR Router Series Layer 2 - LAN Switching Configuration Guide(V7)

49
Tasks at a
g
lance
Configuring the leaf nodes:
• (Required.) Setting the spanning tree mode
• (Optional.) Configuring the device priority
• (Optional.) Configuring the timeout factor
• (Optional.) Configuring the BPDU transmission rate
• (Optional.) Configuring edge ports
• (Optional.) Configuring path costs of ports
• (Optional.) Configuring the port priority
• (Optional.) Configuring the port link type
• (Optional.) Enabling outputting port state transition information
• (Required.) Enabling the spanning tree feature
(Optional.) Performing mCheck
(Optional.) Configuring protection functions
PVST configuration task list
Tasks at a
g
lance
Configuring the root bridge:
• (Required.) Setting the spanning tree mode
• (Optional.) Configuring the root bridge or a secondary root bridge
• (Optional.) Configuring the device priority
• (Optional.) Configuring the network diameter of a switched network
• (Optional.) Configuring spanning tree timers
• (Optional.) Configuring the timeout factor
• (Optional.) Configuring the BPDU transmission rate
• (Optional.) Configuring edge ports
• (Optional.) Configuring the port link type
• (Optional.) Enabling outputting port state transition information
• (Required.) Enabling the spanning tree feature
Configuring the leaf nodes:
• (Required.) Setting the spanning tree mode
• (Optional.) Configuring the device priority
• (Optional.) Configuring the timeout factor
• (Optional.) Configuring the BPDU transmission rate
• (Optional.) Configuring edge ports
• (Optional.) Configuring path costs of ports
• (Optional.) Configuring the port priority
• (Optional.) Configuring the port link type
• (Optional.) Enabling outputting port state transition information
• (Required.) Enabling the spanning tree feature
(Optional.) Performing mCheck
(Optional.) Configuring protection functions