R0106-HP MSR Router Series Layer 2 - LAN Switching Configuration Guide(V7)
93
Assigning a trunk port to a VLAN
A trunk port can allow multiple VLANs. You can assign it to a VLAN in interface view.
When you assign a trunk port to a VLAN, follow these restrictions and guidelines:
• To change the link type of a port from trunk to hybrid or vice versa, set the link type to access first.
• You must configure the trunk port to allow packets from the PVID to pass through by using the port
trunk permit vlan command.
To assign a trunk port to one or multiple VLANs:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter Layer 2 Ethernet interface
view.
interface interface-type
interface-number
N/A
3. Configure the link type of the
port as trunk.
port link-type trunk
By default, all ports are access
ports.
4. Assign the trunk port to the
specified VLANs.
port trunk permit vlan { vlan-id-list
| all }
By default, a trunk port only permits
VLAN 1.
5. (Optional.) Configure the PVID
of the trunk port.
port trunk pvid vlan vlan-id The default setting is VLAN 1.
Assigning a hybrid port to a VLAN
A hybrid port can allow multiple VLANs. You can assign it to the specified VLANs in interface view. Make
sure the VLANs have been created.
When you assign a hybrid port to a VLAN, follow these restrictions and guidelines:
• To change the link type of a port from trunk to hybrid or vice versa, set the link type to access first.
• You must configure the hybrid port to allow packets from the PVID to pass through by using the port
hybrid vlan command.
To assign a hybrid port to one or multiple VLANs:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter Layer 2 Ethernet interface
view.
interface interface-type
interface-number
N/A
3. Configure the link type of the
port as hybrid.
port link-type hybrid
By default, all ports are access
ports.
4. Assign the hybrid port to the
specified VLANs.
port hybrid vlan vlan-id-list
{ tagged | untagged }
By default, the hybrid port is an
untagged member of the VLAN to
which the port belongs when its
link type is access.
5. (Optional.) Configure the PVID
of the hybrid port.
port hybrid pvid vlan vlan-id
By default, the PVID of a hybrid
port is the ID of the VLAN to which
the port belongs when its link type
is access.