R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

103
Related commands
• bundle member-priority
• bundle min-active links
bundle member-priority
Use bundle member-priority to set the bundling priority value for an HDLC-enabled interface.
Use undo bundle member-priority to restore the default.
Syntax
bundle member-priority priority
undo bundle member-priority
Default
The bundling priority value of an HDLC-enabled interface is 32768.
Views
POS interface view, serial interface view
Predefined user roles
network-admin
Parameters
priority: Specifies the bundling priority value of an HDLC-enabled interface. The value range for this
argument is 1 to 65535. A higher priority value means a lower bundling priority.
Examples
# Set the bundling priority value to 1 for HDLC-enabled interface POS 2/2/0.
<Sysname> system-view
[Sysname] interface pos 2/2/0
[Sysname-Pos2/2/0] bundle member-priority 1
bundle min-active bandwidth
Use bundle min-active bandwidth to set the minimum bandwidth required for bringing up an HDLC link
bundle interface.
Use undo bundle min-active bandwidth to cancel the limit.
Syntax
bundle min-active bandwidth bandwidth
undo bundle min-active bandwidth
Default
The minimum bandwidth required for bringing up an HDLC link bundle is not set.
Views
HDLC link bundle interface view
Predefined user roles
network-admin