R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

4
Field Descri
p
tion
Received:
Compressed/Error/Total
Statistics for received packets:
• Compressed—Number of compressed
packets.
• Error—Number of error packets.
• Total—Total number of received packets.
Sent:
Compressed/Total
Sent/Saved/Total
Packet-based compression ratio
Byte-based compression ratio
Statistics for sent packets:
• Compressed—Number of compressed
packets.
• Total—Total number of sent packets.
• Sent—Bytes of sent packets.
• Saved—Bytes of saved packets.
• Total—Total bytes to be sent if packets are
not compressed.
• Packet-based compression ratio—Ratio of
compressed packets to the total sent
packets.
• Byte-based compression ratio—Ratio of
saved bytes to the total sent bytes.
Connections:
Rx/Tx
Five-Minute-Miss
Max-Miss
Number of connections.
• Rx—Number of connections that the
receiver can decompress.
• Tx—Number of connections that the
sender can compress.
• Five-Minutes-Miss—Numbers of search
failures within the last 5 minutes.
• Max-Miss—Maximum numbers of search
failures within 5 minutes.
Related commands
• ppp compression iphc enable
• reset ppp compression iphc
ip address ppp-negotiate
Use ip address ppp-negotiate to enable IP address negotiation on the local interface, so that the local
interface can accept the IP address allocated by the server.
Use undo ip address ppp-negotiate to restore the default.
Syntax
ip address ppp-negotiate
undo ip address ppp-negotiate
Default
IP address negotiation is disabled.
Views
Interface view