R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

113
If you specify both hdlc-bundle and bundle-id, this command clears the statistics of the specified HDLC
link bundle interface.
Examples
# Clear the statistics of HDLC link bundle interface 1.
<Sysname> reset counters interface hdlc-bundle 1
Related commands
display interface hdlc-bundle
service
Use service to specify a card to process or forward traffic for an HDLC link bundle interface.
Use undo service to restore the default.
Syntax
service slot slot-number
undo service slot
The following matrix shows the support of MSR routers for the command:
Hardware Command com
p
atibilit
y
MSR2000 No
MSR3000 No
MSR4000 Yes
Default
No card is specified to process or forward traffic for an HDLC link bundle interface.
Views
HDLC link bundle interface view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by its slot number.
Usage guidelines
When you do not specify a card to process or forward traffic for an HDLC link bundle interface by using
the service command, the card where the receiving interface resides processes the received traffic. To
alleviate the processing pressure on a card and make efficient use of processing capabilities of service
cards, you can specify a card to handle traffic for an HDLC link bundle interface. Then, all traffic that
arrives at the HDLC link bundle interface will be processed or forwarded by the card whether or not the
receiving interface is located on the card.
If the card specified by this command is pulled out, traffic forwarding failure occurs on the HDLC link
bundle interface. After the card is plugged in again, the card resumes traffic forwarding for the HDLC
bundle interface.