R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

116
Call Property: Digital
Call Type: Out
Calling Number: 8306001
Calling Subaddress:
Called Number: 8306002
Called Subaddress:
Start Time: 13-02-14 12:22:26
Time Used: 00:11:20
Table 19 Command output
Field Description
Channel Info B-channel for the call.
Call Property
Call property:
• Digital.
• Analog.
Call Type
Call type:
• Incoming call.
• Outgoing call.
In ISDN, "incoming" and "outgoing" describe a call as viewed by the
user side of the interface.
Start Time Time when the call was established.
Time Used Duration of the connection since the call was established.
display isdn call-info
Use display isdn call-info to display information about calls on ISDN interfaces.
Syntax
display isdn call-info [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an ISDN BRI or PRI interface by its type and number.
If you do not specify an interface, this command displays call information for all ISDN interfaces.
Usage guidelines
This command displays information about each ISDN layer. When a call setup fails, you can use this
command to identify the layer that caused the failure.
Examples
# Display call information for BRI 2/4/0.
<Sysname> display isdn call-info interface bri 2/4/0