R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

121
display isdn parameters
Use display isdn parameters to display ISDN Layer 2 and Layer 3 parameters.
Syntax
display isdn parameters { protocol | interface interface-type interface-number }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
protocol: Specifies an ISDN protocol. Available options include 5ess, ansi, at&t, dss1, etsi, ni, ni2, ntt,
and qsig. If you specify a protocol, this command displays the default parameters for the protocol.
interface interface-type interface-number: Specifies an ISDN BRI or PRI interface by its type and number.
If you specify an interface, this command displays the ISDN Layer 2 and Layer 3 parameters for the
specified interface.
Examples
# Display the default DSS1 parameters.
<Sysname> display isdn parameters dss1
DSS1 ISDN Layer 2 system parameters:
T200(sec) T201(sec) T202(sec) T203(sec) N200 K(BRI) K(PRI)
1 1 2 10 3 1 7
DSS1 ISDN Layer 3 system timers(default values):
Timer Value(sec)
T301 240
T302 15
T303 4
T304 30
T305 30
T308 4
T309 90
T310 40
T313 4
T322 4
# Display the ISDN parameters for the PRI interface Serial 2/3/0:15.
<Sysname> display isdn parameters interface serial 2/3/0:15
Serial2/3/0:15(Network-side):
QSIG ISDN Layer 2 system parameters:
T200(sec) T201(sec) T202(sec) T203(sec) N200 K(PRI)
1 1 2 10 3 7
QSIG ISDN Layer 3 system timers:
Timer Value(sec)