R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

122
T301 35
T302 37
T303 8
T304 50
T305 20
T308 3
T309 130
T310 130
T313 6
T322 8
Table 22 Command output
Field Descri
p
tion
T200(sec) Q.921 T200 timer sets the retransmission interval (in seconds).
T201(sec)
Q.921 T201 timer sets the minimum interval (in seconds) between the
retransmissions of a TEI Identity check message.
T202(sec)
Q.921 T202 timer sets the minimum interval (in seconds) between
transmissions of TEI Identity request messages.
T203(sec)
Q.921 T203 timer sets the maximum amount of time that the data link can
be idle.
N200 Q.921 N200 counter sets the maximum number of retransmissions.
K(BRI)
Maximum number of unacknowledged frames (sliding window size) on the
ISDN BRI interface.
K(PRI)
Maximum number of unacknowledged frames (sliding window size) on the
ISDN PRI interface.
display isdn spid
Use display isdn spid to display SPID information for NI-enabled BRI interfaces.
Syntax
display isdn spid [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a BRI interface that runs the NI protocol. If you do not
specify an interface, this command displays SPID information for all NI-enabled BRI interfaces.
Examples
# Display SPID information for the NI-enabled interface BRI 2/4/0 (the SPID type is AUTO).
<Sysname> display isdn spid interface bri 2/4/0
Interface Bri2/4/0: