R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

128
Parameters
calling-number: Specifies a calling number, a case-sensitive string of 1 to 24 characters.
Usage guidelines
ISDN calling number identification enables an ISDN interface to include the call number of a calling
party in the outgoing call SETUP messages. The calling number information can be used for different
purposes. For example, the service provider can use this information to identify the pricing scheme for the
calling party. The called party can use this information to verify the origin of calls.
The device will not send the specified calling number if the connected service provider switch does not
transmit calling number information.
Examples
# Configure BRI 2/4/0 to include 8060170 as the calling number in outgoing SETUP messages.
<Sysname> system-view
[Sysname] interface bri 2/4/0
[Sysname-Bri2/4/0] isdn calling 8060170
isdn carry calling-name
Use isdn carry calling-name to configure ISDN to include the calling-name field in outgoing packets on
an ISDN interface.
Use undo isdn carry calling-name to restore the default.
Syntax
isdn carry calling-name
undo isdn carry calling-name
Default
ISDN does not include the calling-name field in outgoing packets.
Views
ISDN interface view
Predefined user roles
network-admin
Usage guidelines
This command enables a called party to identify the name of a calling party attached to the interface.
You can execute this command only when no call is present on the ISDN interface.
Examples
# Configure ISDN to include the calling-name field in outgoing packets on BRI 2/4/0.
<Sysname> system-view
[Sysname] interface bri 2/4/0
[Sysname-Bri2/4/0] isdn carry calling-name
Related commands
isdn carry connected-name