R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

129
isdn carry connected-name
Use isdn carry connected-name to configure ISDN to include the connected-name field in outgoing
packets on an ISDN interface.
Use undo isdn carry connected-name to restore the default.
Syntax
isdn carry connected-name
undo isdn carry connected-name
Default
ISDN does not include the connected-name field in outgoing packets.
Views
ISDN interface view
Predefined user roles
network-admin
Usage guidelines
This command enables a calling party to identify the name of a called party attached to the interface.
You can execute this command only when no call is present on the ISDN interface.
Examples
# Configure ISDN to include the connected-name field in outgoing packets on BRI 2/4/0.
<Sysname> system-view
[Sysname] interface bri 2/4/0
[Sysname-Bri2/4/0] isdn carry connected-name
Related commands
isdn carry calling-name
isdn check-called-number
Use isdn check-called-number to configure called-number verification for incoming calls on an ISDN
interface.
Use undo isdn check-called-number to remove an acceptable called number.
Syntax
isdn check-called-number check-index called-party-number
undo isdn check-called-number check-index
Default
ISDN does not check the called number or subaddress in incoming SETUP messages.
Views
ISDN interface view
Predefined user roles
network-admin