R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

134
[Sysname] interface bri 2/4/0
[Sysname-Bri2/4/0] isdn ignore sending-complete incoming
# Exclude the sending complete indication in the outgoing SETUP message on BRI 2/4/0.
[Sysname-Bri2/4/0] isdn ignore sending-complete outgoing
Related commands
isdn protocol-type
isdn l3-timer
Use isdn l3-timer to set an ISDN L3 timer.
Use undo isdn l3-timer to restore the default.
Syntax
isdn l3-timer timer-name time-interval
undo isdn l3-timer { timer-name | all }
Default
Table 24 lists the default L3 timer settings for DSS1. For the default L3 timer values for other ISDN
protocols, use the display isdn parameters command.
Views
ISDN interface view
Predefined user roles
network-admin
Parameters
timer-name: Specifies an ISDN L3 timer name.
time-interval: Specifies a timer value.
all: Restores the default values of all ISDN L3 timers.
Table 24 DSS1 ISDN L3 timers
Keyword for the
time
r
-nam
e
ar
g
ument
Timer name Value range (in seconds) Default (in seconds)
t301 T301 30 to 1200 240
t302 T302 1 to 60 15
t303 T303 2 to 10 4
t304 T304 10 to 60 30
t305 T305 4 to 30 30
t308 T308 2 to 10 4
t309 T309 1 to 240 90
t310 T310 10 to 240 40
t313 T313 2 to 10 4
t322 T322 2 to 10 4