R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

143
Predefined user roles
network-admin
Parameters
indicator: Specifies one of the progress descriptions in Table 31.
Table 31 Progress descriptions
Value Description
1
Call is not an end-to-end ISDN call. Further call progress information might be available
in-band.
2 Destination address is non-ISDN.
3 Origination address is non-ISDN.
4 Call has returned to the ISDN network.
5
Interworking has occurred and has resulted in a telecommunication service change.
For example, the ISDN network changes to the VoIP network.
8
Signals of other protocols than ISDN are present on the D channel. For example, X.25 virtual
call signaling is present.
Usage guidelines
The progress indicator information element describes an event that has occurred during the life of the
call.
You only need to set the progress description manually only if you are required by the service provider to
do so for compatibility.
Examples
# Set the progress description code to 8 on BRI 2/4/0.
<Sysname> system-view
[Sysname] interface bri 2/4/0
[Sysname-Bri2/4/0] isdn progress-indicator 8
isdn progress-to-alerting enable
Use isdn progress-to-alerting enable to configure an ISDN interface to interpret the PROGRESS message
as the ALERTING message.
Use undo isdn progress-to-alerting enable to restore the default.
Syntax
isdn progress-to-alerting enable
undo isdn progress-to-alerting enable
Default
By default, the progress message is not interpreted as the ALERTING message.
Views
ISDN interface view