R0106-HP MSR Router Series Layer 2 - WAN Command Reference(V7)

155
Usage guidelines
You can configure only network-side BRI interfaces to supply line power to the terminal equipment.
Only ISDN BRI interfaces on the BSV module can operate on the network side.
You can configure this command only when no call is present.
Examples
# Configure BRI 2/4/0 to supply line power to the terminal equipment.
<Sysname> system-view
[Sysname] interface bri 2/4/0
[Sysname-Bri2/4/0] isdn protocol-mode network
[Sysname-Bri2/4/0] power-source
Related commands
isdn protocol-mode